<\/p>\n
Electrolyte V-Brite 200 is a 2-part glazing agent system for acid copper electrolyte. It delivers a very thin, clear copper layer with low internal stress and maximum detail retention. Ideal for copper-plating metals such as nickel, copper or brass or plastic, 3D prints and organic material.<\/p>\n
The system consists of V-Brite 200S and V-Brite X<\/a>. V-Brite 200S is only added when creating a new bath. V-Brite X is added during preparation and then periodically to maintain shine and sales quality.<\/p>\n Includes dosing syringe to easily measure the right amount.<\/p>\n <\/p>\n The finish of V-Brite 100 and 200 is similar in terms of gloss and appearance.<\/p>\n <\/p>\n (Download the manual in the downloads tab for detailed information)<\/p>\n If you use a lower concentration of sulfuric acid than 96%, convert the required amount so that the same amount of pure acid per liter is achieved. 96% have about 1.84 g\/ml. <\/p>\n <\/p>\n <\/p>\n Please note! Always add acid to water – never add acid to water!<\/strong> <\/p>\n By adding glazing agent to copper electrolyte, you control properties such as gloss, flexibility, internal tension and the filling capacity. This gives you an even, shiny copper layer that adheres well and also covers neatly in zones with lower current density. <\/p>\n <\/p>\n If you use Verzinkshop copper electrolyte, V-Brite 200S is already processed and you only need V-Brite X<\/a> for maintenance. If you make your own electrolyte, add both V-Brite 200S and V-Brite X.<\/p>\n","protected":false},"excerpt":{"rendered":" Electrolyte V-Brite 200 is a 2-part glazing agent system for acid copper electrolyte. It delivers a very thin, clear copper layer with low internal stress and maximum detail retention. Ideal for copper-plating plastic, 3D prints and organic material. <\/p>\n","protected":false},"featured_media":15352,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false,"parent_description":" Electrolyte V-Brite 200 is a 2-part glazing agent system for acid copper electrolyte. It delivers a very thin, clear copper layer with low internal stress and maximum detail retention. Ideal for copper-plating metals such as nickel, copper or brass or plastic, 3D prints and organic material.<\/p>\nV-Brite 100 vs V-Brite 200 Copper Electrolyte<\/h3>\n
\n
Required to make your own acidic copper electrolyte<\/h3>\n
\n
Composition of copper electrolyte per 1 liter<\/h3>\n
\n
Short step-by-step plan for producing acid copper electrolyte<\/h3>\n
\n
\n <\/p>\nProperties<\/h3>\n
\n
What is copper brightener and why do you use it<\/h3>\n
How does the V-Brite 200 system work?<\/h3>\n
\n
Copper Glazing Agent V-Brite 200S<\/h2>\n \n